Electric lock Iseo 531010605DX

Iseo 531010605DX electromechanical front door lock (right-sided) is suitable for both outdoor and indoor installation on heavy iron or wooden doors, as well as lattice structures. It can be used both as a conventional overhead mechanical lock and as an electromechanical option when connecting a 12V voltage. From the outside (depending on the configuration), the lock is opened using a radio remote control or key, from the inside with a mechanical button. It is located on the lock body, which does not require additional handles to be inserted. This button opens the lock mechanically, so its operation does not depend on electricity. The tear-off button can be locked using an internal cylinder mechanism, which allows the lock to be installed on lattice structures. Operating temperature range: -50 C ~ 60 C.

Ventilation mode - like all electromechanical locks, this model closes when the door is closed. But the ventilation mode allows you to block the lock function. In other words: the lock can be turned off when it is not needed, while the door will not be held in the closed state.
The ventilation mode is activated by the internal cylinder when the mechanical opening button is pressed.

Care tips. To avoid breakage or jamming of the door lock, it is necessary to properly care for it, as dust and dirt can accumulate in it. Therefore, the locks on the doors of apartments should be lubricated at least once a year, and in case of increased load up to 4 times. In this case, it is most recommended to use lock care products from the manufacturer, which will be specially designed for this type of lock.

Iseo front door locks< /strong> are reliable and high-quality locks exclusively made in Italy, tested by time and have proven themselves positively in operation.