Flexible self-adhesive beige skirting board SW-00000066

PPP skirtingPlinth made of porous polypropylene is a decorative element installed along the bottom of the wall to cover the joint between the wall and the floor. Thanks to its adhesive base, it is easy to install without the use of additional materials and is an ideal addition to various interior solutions.

Material: porous polypropylene (PPP)

Dimensions: 80 x 2350 x 7 mm

Texture: embossed, matte surface

The plinth consists of the following layers:

1. PVC film (on the front side) is a polymer consisting of long chains of vinyl chloride molecules that contain chlorine atoms, this makes the material resistant to chemicals, and due to the amorphous structure, PVC is very elastic, has low weight and resistance to mechanical damage.
2. Decorative layer: high quality color printing that retains its saturation for a long time.
3. The core layer of cellular polypropylene (CPP) is a thermoplastic polymer, its structure includes repeating molecular units of propylene. The structure of PPP is cellular, due to which the material has good thermal insulation and low density, and, accordingly, low weight. Porous polypropylene is also moisture resistant and chemically inert.
4. Foil layer: the main property of this layer is the reflection of heat waves, which allows minimizing heat losses, thereby improving the thermal insulation of the room.
5. Adhesive layer: non-toxic base with a high level of adhesion.
6. Protective film – protects the adhesive layer from drying out and contamination, and can be easily removed during installation.

Manufacturing process:

Application:

suitable for interior finishing work: decoration and walls in all types of residential and commercial premises, as well as for decorating furniture, doors and other flat surfaces.

Temperature range: Porous polypropylene can withstand operating temperatures from -20°C to +60°C.

Properties and advantages of the material:

Calculation of the required amount of material:

1. Measure the length of the surface to be pasted; to do this, you need to calculate the perimeter of the room. For example, the lengths of the walls of the room are 5.60 m and 3.20 m, then the perimeter of the room P = 5.6*2+3.2*2=17.6 m.
2. The resulting perimeter must be divided by the length of one plinth (2.8 m) and rounded up: 17.6/2.8 = 6.28 rounded to 7 pcs.
3. During the installation process, waste may arise due to trimming the baseboard, so it is recommended to add 1-2 strips to the calculation.

Installation instructions:

Surface requirements

For successful installation of adhesive-based plinths, the surface on which they will be installed must be:

1. clean (free from dust, dirt, grease and other contaminants);
2. smooth, without noticeable irregularities or cracks (if necessary, use putty or putty);
3. dry (moisture can affect the adhesive base and its adhesive properties);
4. heat, from 18ºС to 25ºС (for better adhesion of the adhesive layer to the surface);
5. free from fungus and mold;
6. without old wallpaper or other decorative elements;

If the wall has been painted or covered with any other material, a primer coat is required to ensure good adhesion.

Installation:

7. It is necessary to make sure that the surface on which the skirting boards are intended to be glued meets the requirements listed above. There should be no drafts in the room during installation work.
8. Gradually begin to remove the protective film on the back of the baseboard to expose the adhesive surface.
9. It is necessary to start installation from one corner and carefully press the baseboard to the surface, ensuring that it is installed evenly and neatly, avoiding the formation of bubbles or wrinkles.
10. The baseboard can be cut using a utility knife or scissors to adjust it to size, especially along the edges and corners of the surface.
11. The baseboard must be pressed firmly against the surface by hand or with a rubber roller to ensure good adhesion between it and the base.
12. Plinths cannot be re-glued.

Care instructions:

Do not use brushes and sponges with abrasive properties, or detergents with a high concentration of alkalis or acids. To remove dirt, it is better to use textile or viscose wipes using mild household chemicals.

Skirting boards, Sticker Wall