Self-adhesive aluminum tile 300x300x3mm SW-00001927 (D)

Description:

• Dimensions: 30x30 thickness 3 mm
• Weight: 1 bar 200 grams
• Texture: quite smooth, but there is a visual 3D effect, not glossy, there is a slight pearlescent shine

Application:

Suitable for interior finishing works in conditions of high temperature and humidity, wall decoration in all types of residential and commercial premises, as well as for decorating and restoring furniture, doors and other smooth surfaces. In addition, the properties of aluminum allow this material to be used for external works.

Material:

1. Protective layer: a polymer coating resistant to abrasion, mechanical damage and moisture, thanks to it, the tile retains its aesthetic appearance for a long time. The polymer layer can be transparent or colored, has a matte surface.
2. Aluminum plate: Aluminum has a special crystal structure – FCC (face-centered cubic) lattice...
3. PVC (polyvinyl chloride) in non-foamed form: Unlike foamed PVC, this material does not contain microscopic air planes, so its density is higher, and accordingly it is harder, more resistant to mechanical impacts and more heat-resistant.
4. Aluminum plate:
5. Porous polypropylene (PPP): It is a thermoplastic polymer, its structure includes repeating molecular units of propylene...
6. Double adhesive layer: non-toxic base with high adhesion.
7. Protective siliconized paper: protects the adhesive layer from drying out and contamination, easily removed during installation.

The main advantages of aluminum tiles:

1. Strength and durability: Thanks to the aluminum coating, the tile has high strength, protecting it from damage and wear...
2. Moisture resistance: PVC material has high resistance to moisture, so such tiles can be used in humid conditions, such as a bathroom or kitchen. Aluminum coating additionally protects...
3. High temperature resistance: The temperature range of aluminum is from about -270°C to about 660°C...
4. Easy installation: Self-adhesive tiles have a special adhesive on the back, which allows them to be easily installed without the need for additional glue or tools...
5. Decorative possibilities: aluminum tiles are available in various colors and designs. This allows you to choose the tile that best suits the interior of your room. A quality alternative to tiles and ceramic tiles.
6. Ease of care: PVC material is easy to clean and does not require special care. You can use ordinary detergents and a cloth to clean the surface...

Editing:

Requirements for surfaces

Aluminum self-adhesive tiles can be installed on most structurally sound substrates, provided they are clean, flat, smooth, dry, free from dust, wax, soap scum and grease...

Please note that rough surfaces such as brick, stone, plywood or oiled wall are not suitable for installation.

1. You must make sure that the surface on which you are going to install the tiles meets the above requirements. The tiles and the surface must be at room temperature to ensure good adhesion of the adhesive base.
2. Remove the protective film from the back of the tile to reveal the adhesive surface.
3. It is necessary to start installation from one corner and gently press the tile onto the surface, ensuring that the tile is installed evenly and neatly, avoiding the formation of bubbles or wrinkles.
4. Tiles can be cut using a utility knife or scissors to adjust tiles to size, especially around edges and corners of the surface.
5. The tiles must be pressed firmly onto the surface to ensure good adhesion.

Care instructions:

It is not advisable to use brushes and sponges with abrasive properties, detergents with a high concentration of alkalis or acids, and does not tolerate water with a high salt content.

Calculation of the required amount of material:

1. Measure the length and height of the surface to be pasted.
2. Multiply the length by the height of each surface in meters and add the results together to get the area.
3. For example, after measurements you got:
   • Wall length 2.2 m.
   • Wall height 0.8 m.
   • 2.2*0.8 = 1.76 m²
4. The resulting area must be divided by the area of one tile (300*300= 0.09) and rounded up:
   • 1.76/0.09=19.55 rounded to 20.
5. During installation, waste may occur due to cutting tiles, so it is recommended to add 2-3 spare tiles to the calculation.

Self-adhesive films, Sticker Wall