Self-adhesive PET mosaic 30*30CM*4MM (D) SW-00001662

PET (polyethylene terephthalate) tiles are often used to create mosaic patterns and decorative elements. PET is a plastic material that is lightweight, durable and resistant to moisture. This material can be used for interior finishing work in both residential and commercial premises.

Material: PET (PET) – polyethylene terephthalate.

Dimensions:

• 30 cm x 30 cm x 4 mm

Weight:75g

Coverage area

• 1 tile 30 cm x 30 cm x 4 mm - 0.09 m2, quantity per 1 m2 - 12 units

Texture:smooth, with recesses between mosaic elements

Layers:

1. Protective transparent layer
2. Decorative layer with print
3. Thermoplastic
4. Double adhesive layer
5. Protective paper

Temperature range: -40 – +75 C

Application: interior finishing work: decorating walls in all types of residential premises (kitchen, bathroom, living room or bedroom, entrance) and commercial premises, furniture, doors and other flat surfaces. often used in interior design, as well as to create art installations and decorative elements.

Properties and advantages of the material:

• Lightweight and durable: The tiles are lightweight and durable, making them easy to logistics, easy to install and ensure a long service life. The material is easy to install, can be cut with scissors or a mounting knife, and does not require additional materials or specialists. It does not diverge between stripes, does not swell or deform. The trim percentage is 1%, which is the best indicator for wall coverings;
• Moisture Resistant: The material is resistant to moisture, steam and mildew, making it suitable for use in high humidity areas such as bathrooms and kitchens. The tiles are suitable for creating a kitchen backsplash; they can be glued near the stove at a distance of at least 20-25 cm;
• Insulation: PET tiles have sound and heat insulation due to the presence of air layers;
• Antistatic effect: the coating contains an antistatic agent, so dust does not collect on the surface;
• Variety of colors and prints: tiles are available in a variety of colors and prints, allowing you to create different design solutions;
• Eco-friendly: The material can be recycled and recycled, making it a more environmentally friendly option than some other materials;
• Easy to maintain: the tile surface is easy to clean and does not require special care
• Duration of service: the material is durable and wear-resistant, which guarantees a long service life of the tiles, from 5 years.

Installation instructions:

Step 1
You need to make sure that the surface on which you are going to install the tiles is clean, dry and level. Any dust, dirt or oil from the surface must be removed and the surface leveled if necessary. The tile and surface must be at room temperature to ensure good adhesion of the adhesive base
Preparing the surface for gluing

Step 2
Peel off the protective film from the back of the self-adhesive tile to expose the adhesive surface.

Step 3
It is necessary to start installation from one corner and carefully press the tile to the surface, ensuring that the tile is installed evenly and neatly, avoiding the formation of bubbles or wrinkles.

Step 4
Tiles can be cut using a knife or scissors to adjust the tiles to size, especially around the edges and corners of the surface.

Step 5
The tiles must be pressed firmly against the surface to ensure good adhesion between the tile and the base.

Self-adhesive films, Sticker Wall