Self-adhesive vinyl tile 600x300x1.5mm, price per 1 piece (SVP-110) Gloss SW-00000499

Vinyl self-adhesive tiles are a decorative material for interior decoration, easy to install thanks to the adhesive base.

The tiles come in a variety of designs, including colors, patterns and textures that imitate natural materials, making them suitable for a variety of interior design solutions.

Strength, durability and moisture resistance allow the tiles to be used in different types of premises on various surfaces.

Material: polyvinyl chloride (PVC)

Dimensions: 60 cm x 30 cm x 1.5 mm

Weight: 60 cm x 30 cm – 115 g

Coverage area: 60 cm x 30 cm x 1.5 mm – 0.18 m2, quantity per 1 m² – 6 units

Packaging: 28 pieces (5 m²)

Packaging dimensions: 62*61*3 cm

Texture: smooth

Material:

• Polymer layer: protects against abrasions and minor mechanical damage, ensures durability of use, and UV protection helps prevent fading, keeping the color rich, due to which the tile has its original aesthetic appearance for a long time.
• Decorative layer: film with high-resolution color printing, which completely imitates the texture of natural materials thanks to a clear and detailed image.
• Polyvinyl chloride (PVC) base layer: a polymer consisting of long chains of vinyl chloride molecules that contain chlorine atoms, which makes the material resistant to chemicals.
• Foil layer: reflection of heat waves, minimization of heat loss, improvement of thermal insulation of the room.
• Adhesive layer: non-toxic base with a high level of adhesion.
• Protective siliconized paper: protects the adhesive layer from drying out and contamination, easily removed during installation.

Temperature conditions: under the influence of high temperatures it can change shape. In the kitchen area near fire sources, the tiles should be installed at a distance of 30-50 cm.

Service life: from 3 years.

Application: interior finishing works: decorating walls in all types of residential premises (kitchen, bathroom, living room, children's room or bedroom, entrance group) and commercial premises (office premises, reception areas, shops, beauty salons or fitness centers, public places, workshops), furniture, doors and other flat surfaces.

Properties and advantages of the material:

1. Easy installation: the self-adhesive layer makes the installation process quick and easy, without the need for additional glue, other materials or specialists. The material is laid end to end, it can be cut with scissors or a utility knife, it does not diverge, swell or deform between the strips. The percentage of cut is 1%, which is the best indicator for wall coverings;
2. Moisture resistance: moisture resistant, an excellent choice for bathrooms, kitchens and other rooms with high humidity. Suitable for creating a kitchen apron, can be glued near the stove at a distance of at least 30-50 cm;
3. Durability: the strength and wear resistance of vinyl allows the tile to remain in its original condition for a long period of time;
4. Aesthetic component: a wide selection of designs imitating natural materials, colors allows you to choose a coating that matches your style and interior;
5. Easy maintenance: easy to clean and does not require special cleaning agents. If an individual tile is damaged, it can be easily replaced without the need for major repairs;
6. Insulation: sound and heat insulation;
7. Environmental safety: made from renewable resources, the material is safe for health and the environment.

Calculation of the required amount of material:

1. Measure the length and height of the surface to be pasted.
2. Multiply the length by the height of each surface in meters and add the results together to get the area.
• For example, after measurements you got:
• Wall length 4.35m.
• Wall height 2.48m.
• 4.35*2.48 = 10.78 m²
3. The resulting area must be divided by the area of one tile (600*300= 0.18) and rounded up:
• 10.78/0.18=59.93, rounded up to 60.
4. During installation, waste may occur due to cutting tiles, so it is recommended to add 2-3 spare tiles to the calculation.

Installation instructions:

1. Self-adhesive vinyl tiles can be glued to old linoleum, tiles, parquet, laminate, glass, paint, primed concrete with small irregularities and small potholes without special surface preparation, but if the surface has whitewash, it is necessary to clean the surface from it.
2. The room during installation must be dry, the room air temperature from +15º to +20ºС.
3. You must ensure that the surface on which you are going to install the tiles is clean, dry and level. You must remove any dust, dirt or oil from the surface, level the surface with a primer if necessary and let it dry for at least 4 hours. The tiles and the surface must be at room temperature to ensure good adhesion of the adhesive base.
4. Gradually begin to remove the protective paper from the back of the tile to reveal the adhesive surface;
5. It is necessary to start installation from one corner and carefully press the tile onto the surface, ensuring that the tile is installed evenly and neatly, avoiding the formation of bubbles or wrinkles;
6. Tiles can be cut using a knife or scissors to adjust the tiles to size, especially at the edges and corners of the surface;
7. To join the strips, it is necessary to remove part of the protective paper from the next tile, place the tile edgewise to the joint with the glued tile, applying the adhesive base to the surface, while smoothing the glued part;
8. The tiles should be pressed firmly onto the surface by hand or with a rubber roller to ensure good adhesion between the tile and the base.

Instructions for partial repair of vinyl surface:

If the coating is partially damaged, remove the damaged tile with a utility knife or spatula and insert a new one, removing the protective paper and pressing it firmly to the surface.

Answers to frequently asked questions:

• Is it possible to glue self-adhesive tiles to ceramic tiles? Yes, this type of vinyl covering can be glued to ceramic tiles, after cleaning them from dust and dirt, and be sure to degrease and dry them.
• What to do with a surface that is covered in greasy film? Use grease removers to remove the film, then dry it.
• What size of unevenness is allowed for mounting vinyl tiles on an adhesive base? Deepening up to 5 mm, convexity up to 3 mm. Before preparing for gluing, it is necessary to sand all unevenness with sandpaper.
• Is it possible to glue self-adhesive vinyl tiles on old linoleum? Gluing on old linoleum is the fastest and most optimal solution.
• What products can be used to clean self-adhesive vinyl tiles? The surface tolerates all non-aggressive cleaning products well. Abrasive cleaning products containing high concentrations of alkali and small particles should not be used.
• Does this vinyl flooring have a plastic or glue smell? Vinyl flooring has no smell.
• Where can self-adhesive vinyl tiles be used? Designed for installation in residential and non-residential premises, can be glued in any room: bathroom, toilet, bedroom, children's room, kitchen, hallway, as well as in workshops, garages and offices.
• Can you glue vinyl tiles to walls? Yes, you can.
• How to cut self-adhesive vinyl tiles? To cut the length, you need a stationery knife. Cut with protective paper.
• Does self-adhesive tile have a locking joint? Vinyl tile does not have a locking joint because the adhesive base has high adhesive properties, so the tile does not come apart and does not need additional locking fastening.

3D panels, Sticker Wall