Molding vinyl self-adhesive matte 5000*100*2mm (D) SW-00001797

1. The polymer layer, which protects against abrasions and minor mechanical damage, ensures long-term use, and UV protection helps prevent fading, keeping the color rich, due to which the molding retains its original aesthetic appearance for a long time.
2. Decorative layer: film with high-quality color printing, which completely imitates the texture of natural materials thanks to a clear and detailed image.
3. The main layer of polyvinyl chloride (PVC) is a polymer consisting of long chains of vinyl chloride molecules, which contain chlorine atoms, which makes the material resistant to chemicals. PVC is an amorphous polymer, this structural feature makes it elastic and impact-resistant, and thanks to stabilizers and softeners, the material is lightweight.
4. Foil layer: the main property of this layer is the reflection of heat waves, which allows minimizing heat loss, thereby improving the thermal insulation of the room.
5. Adhesive layer: non-toxic base with high adhesion level.
6. Protective siliconized film – protects the adhesive layer from drying out and contamination, easily removed during installation.

Temperature conditions: under the influence of high temperatures it can change shape. In the kitchen area near fire sources, the installation of molding should be carried out at a distance of 30-50 cm.

Application: interior finishing works: decorating walls in all types of residential premises (kitchen, bathroom, living room, children's room or bedroom, entrance area) and commercial premises (office premises, reception areas, shops, beauty salons or fitness centers, public places, workshops), furniture, doors and other flat surfaces.

Properties and advantages of the material:

1. Easy installation: the self-adhesive layer makes the installation process quick and easy, without the need for additional glue, additional materials or specialists. The material is laid end to end, it can be cut with scissors or a utility knife, it does not diverge, swell or deform between the strips. The percentage of cut is 1%, which is the best indicator for wall coverings;
2. Moisture resistance: vinyl moldings are moisture resistant, making them an excellent choice for bathrooms, kitchens and other rooms with high humidity, the material is also resistant to steam, as well as to mold. The molding is suitable for creating a kitchen apron, can be glued near the stove at a distance of at least 30-50 cm;
3. Durability: The strength and wear resistance of vinyl allows the molding to remain in its original condition for a long period of time;
4. Aesthetic component: a wide selection of designs imitating natural materials, the ability to select molding for vinyl coverings;
5. Easy care: vinyl is easy to clean and does not require special cleaning products.
6. Environmentally friendly: vinyl moldings are made from renewable resources, and the material itself is safe for health and the environment.

Calculation of the required amount of material:

1. Measure the length of the surface to be pasted over, to do this you need to calculate the perimeter of the room. For example, the lengths of the walls of the room are 5.60 m and 3.20 m, then the perimeter of the room P = 5.6 * 2 + 3.2 * 2 = 17.6 m.
2. The resulting perimeter must be divided by the length of one roll of molding (5 m) and rounded up: 17.6/5 = 3.52 rounded up to 4 rolls.
3. During installation, waste may occur due to trimming of the molding, so it is recommended to add at least 1 spare roll to the calculation.

Installation instructions:

Vinyl molding in a roll can be glued to old linoleum, tiles, parquet, laminate, glass, paint, primed concrete with small irregularities and small potholes without special surface preparation, but if the surface has whitewash, then it is necessary to clean the surface.

Skirting boards, Sticker Wall